BEST ACCESS SYSTEMS 35HW Servisní příručka stáhnout pdf (Strana 101)

Service and Maintenance for Mortise Locks

W Series Service Manual 4–47

5. Press the L-shaped end of the spring so that the center of the spring

can slide to the bottom of the screw post. The spring tension should

push the bolt toward the front of the case.

Task G. To turn over the latchbolt:

1. Slide the brass grommet on the latchbolt away from the U-shaped

latchbolt rod support. Grasp the latchbolt by the square-shaped tail

and pull the latchbolt up and out of the case.

2. Turn over the latchbolt and rotate the anti-friction latch lever into

position. Place the latchbolt in the case.

3. Slide the brass grommet on the latchbolt away from the U-shaped

latchbolt rod support. Rest the latchbolt rod into the U-shaped

support. Release the grommet. It should snap into place.

Note: If you can pull the square-shaped tail out of the rod support,

the latchbolt is not placed properly. Reposition the latchbolt.

Figure 4.45 Turning over the auxiliary bolt (closeup, IDH Max)

L-shaped end of the auxiliary bolt spring

Screw post

Auxiliary bolt

Figure 4.46 Latchbolt with anti-friction latch lever in position

Latchbolt

Anti-friction latch lever

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 227 228

Žádné komentáře

BEST ACCESS SYSTEMS 35HW Servisní příručka Strana 101